information sheet for terminal oiler 63801-7240 order no: ats-638017240 release date: 05-24-07 uncontrolled copy page 1 of 6 revision: b revision date: 05-24-07 information sheet for terminal oiler order no. 63801-7240 for tm3000 press side loading terminals to install a terminal oiler (order no. 63801-7240) to any fineadjust or mini-mac applicator mounted in the tm3000 press use the following procedure. 1. open the front guard. 2. remove lid assembly from the oiler jar. 3. remove upper oiler nut from lid assembly. 4. place the oiler mounting bracket (63801-7230) over tube and replace upper nut and tighten securely. 5. place lid assembly with mounting bracket on the oiler jar and turn until hand tight. do not over tighten. 6. mount terminal oiler assembly with bracket on the side of the plate-quick change (63801-7222) installed on the tm-3000 press. see figure 1. 7. close the front guard. 8. recommended oil: product name : transdraw b-19 vendor : sure lubricant, inc. 356 south lively boulevard elk grove village, il 60007-2010 phone: 888-787-3582 fax: 847-956-6655 e-mail: surelube@aol.com 9. for replacement wicks use part no. 63890-0727 (package of 25). americas headquarters -jtmf
*mmjopjt64" .0-&9 bnfsjogp!npmfydpn far east north headquarters :bnbup
,bobhbxb
+bqbo gfojogp!npmfydpn far east south headquarters +vspoh
4johbqpsf gftjogp!npmfydpn european headquarters .vojdi
(fsnboz fvsjogp!npmfydpn corporate headquarters 8fmmjohupo$u -jtmf
*-64" 'by visit our web site at http://www.molex.com m5 x 10lg bhcs 63801-7240 oiler assembly use 63801-7230 mtg. bracket open front guard 63801-7222 plate-quick change figure 1
information sheet for terminal oiler 63801-7240 order no: ats-638017240 release date: 05-24-07 uncontrolled copy page 2 of 6 revision: b revision date: 05-24-07 information sheet for terminal oiler order no. 63801-7240 for tm3000 press rear loading terminals to install a terminal oiler (order no. 63801-7240) to any fineadjust or mini-mac applicator mounted in the tm3000 press use the following procedure. 1. remove the rear guard (63801-7281). 2. remove lid assembly from the oiler jar. 3. remove upper oiler nut from lid assembly. 4. place the oiler mounting bracket (63801-7230) over tube and replace upper nut and tighten securely. 5. place lid assembly with mounting bracket on the oiler jar and turn until hand tight. do not over tighten. 6. mount terminal oiler assembly with bracket on the back of the plate-quick change (63801- 7222) installed on the tm-3000 press. see figure 1. 7. replace the rear guard. 8. recommended oil: product name : transdraw b-19 vendor : sure lubricant, inc. 356 south lively boulevard elk grove village, il 60007-2010 phone: 888-787-3582 fax: 847-956-6655 e-mail: surelube@aol.com 9. for replacement wicks use part no. 63890-0727 (package of 25). americas headquarters lisle, illinois 60532 u.s.a. 1-800-78molex amerinfo@molex.com far east north headquarters yamato, kanagawa, japan 81-462-65-2324 feninfo@molex.com far east south headquarters jurong, singapore 65-6-268-6868 fesinfo@molex.com european headquarters munich, germany 49-89-413092-0 eurinfo@molex.com corporate headquarters 2222 we llington ct. lisle, il 60532 u.s.a. 630-969-4550 fax: 630-969-1352 visit our web site at http://www.molex.com m5 x 10lg bhcs 63801-7240 oiler assembly use 638 01-7230 mtg. bracket remove rear guard 63801-7222 plate-quick change figure 1
information sheet for terminal oiler 63801-7240 order no: ats-638017240 release date: 05-24-07 uncontrolled copy page 3 of 6 revision: b revision date: 05-24-07 information sheet terminal oiler order no. 63801-7240 for tm2000 with guard 63800-8310 to install a terminal oiler (order no. 63801-7240) to any fineadjust or mini-mac applicator mounted in the tm2000 press with guard (part no. 63800-8310), use the following procedure. 1. remove the guard 63800-8310. 2. remove lid assembly from the oiler jar. 3. remove upper oiler nut from lid assembly. 4. place oiler mounting bracket over tube and replace upper nut and tighten securely. 5. place lid assembly with mounting bracket on the oiler jar and turn until hand tight. do not over tighten. 6. mount terminal oiler assembly with bracket on the frame of the fineadjust or mini-mac applicator. see figure 1 7. replace the guard. 8. recommended oil: product name : transdraw b-19 vendor : sure lubricant, inc. 356 south lively boulevard elk grove village, il 60007-2010 phone: 888-787-3582 fax: 847-956-6655 e-mail: surelube@aol.com 9. for replacement wicks use part no.63890-0727 (package of 25). americas headquarters lisle, illinois 60532 u.s.a. 1-800-78molex amerinfo@molex.com far east north headquarters yamato, kanagawa, japan 81-462-65-2324 feninfo@molex.com far east south headquarters jurong, singapore 65-6-268-6868 fesinfo@molex.com european headquarters munich, germany 49-89-413092-0 eurinfo@molex.com corporate headquarters 2222 we llington ct. lisle, il 60532 u.s.a. 630-969-4550 fax: 630-969-1352 visit our web site at http://www.molex.com m5 x 10lg bhcs applicator 63801-7240 oiler assembly use 63890-0713 mtg. bracket 63800-8310 guard figure 1
information sheet for terminal oiler 63801-7240 order no: ats-638017240 release date: 05-24-07 uncontrolled copy page 4 of 6 revision: b revision date: 05-24-07 information sheet terminal oiler order no. 63801-7240 for tm2000 press with guard 63800-8350 to install a terminal oiler (order no. 63801-7240) to a tm2000 press, use the following procedure. 1. remove lid assembly from the oiler jar. 2. remove upper oiler nut from lid assembly. 3. place oiler mtg. bracket over tube and replace upper nut and tighten securely. 4. place lid assembly with mtg. bracket on the oiler jar and turn until hand tight. do not over tighten. 5. mount terminal oiler assembly with bracket on the guard of the tm2000 press. 6. recommended lubricant oil: product name : transdraw b-19 vendor : sure lubricant, inc. 356 south lively boulevard elk grove village, il 60007-2010 phone: 888-787-3582 fax: 847-956-6655 e-mail: surelube@aol.com 7. for replacement wicks use part no. 63890-0727 (package of 25). americas headquarters lisle, illinois 60532 u.s.a. 1-800-78molex amerinfo@molex.com far east north headquarters yamato, kanagawa, japan 81-462-65-2324 feninfo@molex.com far east south headquarters jurong, singapore 65-6-268-6868 fesinfo@molex.com european headquarters munich, germany 49-89-413092-0 eurinfo@molex.com corporate headquarters 2222 we llington ct. lisle, il 60532 u.s.a. 630-969-4550 fax: 630-969-1352 visit our web site at http://www.molex.com m6 x 12lg. bhcs guard m6 full nut nut upper lid assembly jar use 63890-0725 mtg. bracket m6 flat washer
information sheet for terminal oiler 63801-7240 order no: ats-638017240 release date: 05-24-07 uncontrolled copy page 5 of 6 revision: b revision date: 05-24-07 information sheet terminal oiler order no. 63801-7240 for fineadjust and mini-mac applicators to install a terminal oiler (order no. 63801-7240) to any fineadjust or mini-mac applicator, use the following procedure. 1. remove lid assembly from the oiler jar. 2. remove upper oiler nut from lid assembly. 3. place oiler mtg. bracket over tube and replace upper nut and tighten securely. 4. place lid assembly with mounting bracket on the oiler jar and turn until hand tight. do not over tighten. 5. mount terminal oiler assembly with bracket on the frame of the fineadjust or mini-mac applicator. 6. recommended lubricant oil: product name : transdraw b-19 vendor : sure lubricant, inc. 356 south lively boulevard elk grove village, il 60007-2010 phone: 888-787-3582 fax: 847-956-6655 e-mail: surelube@aol.com 7. for replacement wicks use part no. 63890-0727 (package of 25). americas headquarters lisle, illinois 60532 u.s.a. 1-800-78molex amerinfo@molex.com far east north headquarters yamato, kanagawa, japan 81-462-65-2324 feninfo@molex.com far east south headquarters jurong, singapore 65-6-268-6868 fesinfo@molex.com european headquarters munich, germany 49-89-413092-0 eurinfo@molex.com corporate headquarters 2222 we llington ct. lisle, il 60532 u.s.a. 630-969-4550 fax: 630-969-1352 visit our web site at http://www.molex.com m5 x 10lg bhcs frame applicator nut-upper li d assembly jar use 63890-0713 mtg. bracket
information sheet for terminal oiler 63801-7240 order no: ats-638017240 release date: 05-24-07 uncontrolled copy page 6 of 6 revision: b revision date: 05-24-07 information sheet terminal oiler order no. 63801-7240 for a tm40/tm42 press if your tm42 presses was produced before 1996, it did not include provisions to mount an oiler. to install a terminal oiler (order no. 63801-7240) to your press you will need to add a mounting hole. locate this hole on the left side of the frame, with the front of press facing you, under the track. use the following procedure to install the oiler. 1. drill a 4.20mm (.165?) diameter x 17.00mm (.62?) deep in the location shown in the figure shown. 2. tap a m6-1.0 x 12.00mm (.47?) deep. 3. use a m6 bhcs and m6 flat washer to secure oiler onto frame. or 4. drill .159? (#21) x .62? deep. 5. tap #10-32 x .62? deep. 6. use #10-32 x 0.50? bhsc. 7. recommended lubricant oil: product name :transdraw b-19 vendor : sure lubricant, inc. 356 south lively boulevard elk grove village, il 60007-2010 phone: 888-787-3582 fax: 847-956-6655 e-mail: surelube@aol.com 8. for replacement wicks use part no. 63890-0727 (package of 25). americas headquarters lisle, illinois 60532 u.s.a. 1-800-78molex amerinfo@molex.com far east north headquarters yamato, kanagawa, japan 81-462-65-2324 feninfo@molex.com far east south headquarters jurong, singapore 65-6-268-6868 fesinfo@molex.com european headquarters munich, germany 49-89-413092-0 eurinfo@molex.com corporate headquarters 2222 we llington ct. lisle, il 60532 u.s.a. 630-969-4550 fax: 630-969-1352 visit our web site at http://www.molex.com 35.0mm (1.38?) 19.0mm (.75?) drill and tap here m6 x 10lg. bhcs use 63890-0725 mtg. bracket m6 washer 63801-7240 oiler
|
